Lotte Loves stickers will hold on most surfaces. If you're unsure if your surface is suitable, please send us a quick email with your address and we'll send you a small sample sticker free of charge so you can try and test. Please email: [email protected]
If your walls have been freshly painted, please allow three weeks for the paint to dry before applying Lotte Loves stickers.
Applying your stickers is really easy and fun:
1.) Clean your surface with a dry cloth and ensure it is smooth, dry and free of grease and dust.
2.) Cut loosely around each sticker element so that you can arrange them as shown above.
3.) Lay your sticker elements on a hard surface, with the graphic side down, then firmly rub the entire backing-paper with a credit card, rubber spatula or something like that. The aim is to get all the elements to stick to the transfer tape.
4.) Slowly peel away the backing paper with a rolling action. If small bits stick to the backing, simply stop, roll back and press on to the transfer tape again. Before putting the sticker elements to the wall, you might like to use masking tape or thin pencil marks to make sure they’re properly lined up.
5.) Hold the top edge of the transfer tape with your first sticker on and apply it to your surface. Smooth one edge onto the surface first to avoid wrinkles and bubbling, then continue smoothing out the tape all the way down.
6.) Remove the transfer tape by peeling it away at one corner and slowly rolling it along your surface. If any part of your sticker sticks to the tape, simply stop, roll back press again, as before. If you get bubbles, take a needle and poke the bubbled area a couple of times, then smooth it out with your hands.